ExiGo Tubing Kit 1.0, Low Flow rates for general microfluidi - 1 unit

Tubing kit to connect ExiGo syringe pump to flow sensor and from flow sensor to input of microfluidic chip. Suitable for low flow rates and general microfluidic applications. Fluid path: • From syringe to flow sensor: Adapter (luer lock ↔︎ 1/32" black connector) to red PEEK tubing (50cm length) to 1/32" black connector . • Flow sensor to chip: 1/32" black connector to red PEEK tubing (50cm length) pushfit to Tygon tubing (5cm length) with stainless steel pin for connection to microfluidic chip. Tubing / Connector / Adapter specifications: • Adapter: luer lock ↔︎ 1/32" black connector • Flow sensor connectors are black nut and ferrule, 0.8mm = 1/32" • Compatible with flow sensors: 1.5μL/min, 7.0μL/min, 80μL/min • Red PEEK tubing: ID: 130μm = 0.13mm; OD: 800μm = 0.8mm = 1/32" • Tygon tubing: ID: 440μm = 0.44mm • Stainless steel pin: 25 gauge thinwall; 17mm length Not suitable for use with whole blood / platelet aggregation / thrombosis assays.